Other materials:

Rear combination lamp
Bulb Replacement Removal 1. Remove the rear combination lamp. Refer to EXL-260, "Removal and Installation". 2. Turn the rear turn signal lamp bulb socket counterclockwise and remove it. 3. Remove the rear turn signal lamp bulb. Installation Installation is in the reverse order ...

Changing engine oil
QR25DE engine 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature, then turn it off. 3. Remove the oil filler cap A by turning it counterclockwise. 4. Place a large drain pan under the drain plug B . ...

AV Branch line circuit
Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the AV control unit for damage, bend and loose connection (unit side and connector side). I ...