Nissan Altima 2007-2012 Service Manual: Wiper and washer fuse

Description

Diagnosis Procedure

1. CHECK FUSES

Check that the following fuses are not blown.

Is the fuse blown? YES >> Replace the blown fuse after repairing the affected circuit.

NO >> The fuse is normal.

    Component diagnosis
    ...

    Front wiper motor lo circuit
    Component Function Check 1. CHECK FRONT WIPER LO OPERATION 1. Start IPDM E/R auto active test. Refer to PCS-14, "Diagnosis Description". 2. Check that the front wiper operates at the ...

    Other materials:

    P0327, P0328 KS
    Description The knock sensor is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the ECM. DTC Logic DTC DETEC ...

    Optical sensor
    Description The optical sensor converts the outside brightness (lux) to voltage and transmits the optical sensor signal to the BCM. Component Function Check 1.CHECK OPTICAL SENSOR SIGNAL BY CONSULT-III 1. Turn the ignition switch ON. 2. Select "OPTICAL SENSOR" of BCM (HEAD LAMP ...

    Steering switch (sedan)
    Description When one of the steering wheel audio control switches is pushed, the resistance in steering switch circuit changes depending on which button is pushed. Diagnosis Procedure WITH BLUETOOTH 1.CHECK HARNESS 1. Turn ignition switch OFF. 2. Disconnect Bluetooth control unit connect ...