Nissan Altima 2007-2012 Service Manual: Basic inspection
Diagnosis and repair workflow
Repair Work Flow
WORK FLOW
WT-5, "Preliminary Check"
WT-52, "Self-Diagnosis (With CONSULT-III)"
WT-53, "Self-Diagnosis (Without CONSULT-III)"
WT-55, "Symptom ...
Other materials:
B2108 steering lock relay
Description
The steering lock relay ON signal is transmitted to IPDM E/R by BCM via CAN
communication.
IPDM E/R turns the steering lock relay ON and transmits the release of the
steering to BCM.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B2108 is displayed with DTC U1000, first perf ...
CVT Position
Inspection and Adjustment
INSPECTION
1. Place selector lever in “P” position, and turn ignition switch ON (engine
stop).
2. Make sure that selector lever can be shifted to other than “P” position when
brake pedal is depressed.
Also make sure that selector lever can be shifted fro ...
P1726 electric throttle control system
Description
Electric throttle control actuator consists of throttle control motor,
accelerator pedal position sensor, throttle
position sensor etc. The actuator sends a signal to the ECM, and ECM sends the
signal to TCM with CAN
communication.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMAT ...