Nissan Altima 2007-2012 Service Manual: Basic inspection
Diagnosis and repair workflow
Work Flow
OVERALL SEQUENCE
• Reference 1··· Refer to AV-289, "CONSULT - III Function (MULTI AV)".
• Reference 2··· Refer to AV-424, "Symptom Table".
DETAILED FLOW ...
Other materials:
ECM branch line circuit
Diagnosis Procedure
INSPECTION PROCEDURE
1.CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the following terminals and connectors for damage, bend and loose
connection (unit side and connector
side).
- ECM
- Harnes ...
S connector circuit
Description
The starter motor magnetic switch is supplied with power when the ignition
switch is turned to the START position
while the selector lever is in the P or N position (CVT models) or the clutch
pedal is fully depressed (M/T
models).
Diagnosis Procedure
CAUTION:
Perform diagnosis ...
On-vehicle repair
IPDM E/R (INTELLIGENT POWER DISTRIBUTION
MODULE ENGINE ROOM)
Removal and Installation
REMOVAL
1. Disconnect the battery negative terminal.
2. Remove the IPDM E/R cover (1) while pressing the pawl (A) at
the rear end of the IPDM E/R cover (1).
3. Disconnect the harness connectors from the ...