Nissan Altima 2007-2012 Service Manual: Common item

 Diagnosis Description

BCM CONSULT-III FUNCTION

CONSULT-III performs the following functions via CAN communication with BCM.

SYSTEM APPLICATION

BCM can perform the following functions for each system.

NOTE: It can perform the diagnosis modes except the following for all sub system selection items.

CONSULT-III Function

ECU IDENTIFICATION

Displays the BCM part No.

SELF-DIAG RESULT

Refer to BCS-91, "DTC Index".

    Diagnosis system (BCM)
    ...

    Door lock
    CONSULT-III Function (BCM - DOOR LOCK) WORK SUPPORT DATA MONITOR ACTIVE TEST ...

    Other materials:

    B210A steering lock condition switch
    Description There are 2 switches in the electronic steering column lock. IPDM E/R compares those 2 switches conditions to judge the present steering status and transmit the result to BCM via CAN communication. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B210A is displayed with DTC U100 ...

    Secondary speed sensor
    Exploded View 1. CVT assembly 2. Shims 3. O-ring 4. Secondary Speed Sensor Removal and Installation Refer to the figure for removal and installation. CAUTION: • Do not reuse O-ring. • Apply CVT fluid to O-ring. • Insert the shims. • After installation is complete, check ...

    P1701 transmission control module (power supply)
    Description When the power supply to the TCM is cut OFF, for example because the battery is removed, and the self-diagnosis memory function stops, malfunction is detected. NOTE: Since “P1701 TCM-POWER SUPPLY” will be indicated when replacing TCM, perform diagnosis after erasing “SE ...