Nissan Altima 2007-2012 Service Manual: Diagnosis system (BCM)
- Common item
- Door lock
- Rear window defogger
- Buzzer
- INT Lamp
- Multi remote ent
- Headlamp
- Wiper
- Flasher
- Intelligent key
- Comb SW
- BCM
- IMMU
- Battery saver
- Trunk
- Theft ALM
- Retained PWR
- Signal buffer
- Air pressure monitor
Power consumption control system
System Diagram
System Description
OUTLINE
• BCM incorporates a power saving control function that reduces the power
consumption according to the
vehicle status.
• BCM switches the stat ...
Common item
Diagnosis Description
BCM CONSULT-III FUNCTION
CONSULT-III performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions for ...
Other materials:
P0139, P0159 HO2S2
Description
The heated oxygen sensor 2, after three way catalyst (manifold),
monitors the oxygen level in the exhaust gas on each bank.
Even if switching characteristics of the air fuel ratio (A/F) sensor 1
are shifted, the air-fuel ratio is controlled to stoichiometric, by the signal
from th ...
P1554 battery current sensor
Description
The power generation voltage variable control enables fuel consumption to be
decreased by reducing the
engine load which is caused by the power generation of the generator. The
battery current sensor is installed
to the battery cable at the negative terminal. The sensor measures t ...
Rear lower link & coil spring
Removal and Installation
Removal
1. Loosen the rear lower link bolt and nut from the suspension member side.
2. Support the rear lower link by placing a suitable jack under the knuckle.
3. Remove the rear lower link adjusting bolt and nut from the suspension
member side using power tool.
...