Nissan Altima 2007-2012 Service Manual: Communication signal circuit (sedan)

SATELLITE RADIO TUNER

Description

Communication signals are exchanged between the audio unit and satellite radio tuner using the communication circuits.

 Diagnosis Procedure

1.CHECK HARNESS - 1

1. Turn ignition switch OFF.

2. Disconnect satellite radio tuner (factory installed) connector B123 and audio unit connector M45.

3. Check continuity between satellite radio tuner (factory installed) harness connector B123 (A) terminal 28 and audio unit harness connector M45 (B) terminal 38.

4. Check continuity between satellite radio tuner (factory installed) harness connector B123 (A) terminal 28 and ground.

Are continuity results as specified? YES >> GO TO 2

Are continuity results as specified? YES >> GO TO 2

2.CHECK HARNESS - 2

1. Check continuity between satellite radio tuner (factory installed) harness connector B123 (A) terminal 29 and audio unit harness connector M45 (B) terminal 39.

2. Check continuity between satellite radio tuner (factory installed) harness connector B123 (A) terminal 29 and ground.

Are continuity results as specified? YES >> GO TO 3

NO >> Repair harness or connector.

3.CHECK HARNESS - 3

1. Check continuity between satellite radio tuner (factory installed) harness connector B123 (A) terminal 30 and audio unit harness connector M45 (B) terminal 40.

2. Check continuity between satellite radio tuner (factory installed) harness connector B123 (A) terminal 30 and ground.

Are continuity results as specified? YES >> GO TO 4

NO >> Repair harness or connector.

4.CHECK REQ1 SIGNAL

1. Connect satellite radio tuner (factory installed) connector and audio unit connector.

2. Turn ignition switch to ACC

3. Check signal between satellite radio tuner (factory installed) harness connector B123 terminal 28 and ground with CONSULT-III or oscilloscope.

Are voltage readings as specified? YES >> GO TO 5

NO >> Replace audio unit. Refer to AV-72, "Removal and Installation".

5.CHECK TXD SIGNAL

Check signal between satellite radio tuner (factory installed) harness connector B123 terminal 29 and ground with CONSULT-III or oscilloscope.

Are the voltage readings as specified? YES >> GO TO 6

NO >> Replace satellite radio tuner. Refer to AV-76, "Removal and Installation - Sedan".

6.CHECK RXD SIGNAL

Check signal between satellite radio tuner (factory installed) harness connector B123 terminal 30 and ground with CONSULT-III or oscilloscope.

Are the voltage readings as specified? YES >> Replace satellite radio tuner. Refer to AV-76, "Removal and Installation - Sedan".

NO >> Replace audio unit. Refer to AV-72, "Removal and Installation".

    Communication signal circuit (coupe)
    SATELLITE RADIO TUNER  Description Communication signals are exchanged between the audio unit and satellite radio tuner using the communication circuits. Diagnosis Procedure 1.CHECK HARN ...

    Sound signal circuit (coupe)
    SATELLITE RADIO TUNER Description Left and right channel audio signals are supplied from the satellite radio tuner to the audio unit through the sound signal circuits. Diagnosis Procedure LEFT ...

    Other materials:

    FM/AM/SAT radio with compact disc (CD) player (Type C) (if so equipped)
    1. CD eject button 2. XM button* 3. Display screen 4. CD insert slot 5. SEEK button 6. SCAN button 7. CAT button 8. BACK button 9. APPS button 10.TUNE/SCROLL knob, ENTER/SETTING button 11.Station select (1 - 6) buttons 12.RDM button 13.RPT button 14.VOL (volume) knob / button 1 ...

    Horn
    Description Horn (high/low) is located inside of front bumper and operates when theft warning system is in alarm phase. Component Function Check 1.CHECK FUNCTION 1. Select HORN in “ACTIVE TEST” mode with CONSULT-III. 2. Check the horn (high/low) operation. Is the operation normal? ...

    Heater & cooling unit assembly
    Removal and Installation COMPONENTS 1. Steering member 2. Heater and cooling unit 3. Blower unit REMOVAL 1. Discharge the refrigerant from the A/C system. Refer to HA-24, "HFC-134a (R-134a) Service Procedure". 2. Drain the engine coolant from the cooling system. Refer to CO-1 ...