Nissan Altima 2007-2012 Service Manual: Drive shaft

Inspection

Check boot and drive shaft for cracks, wear, damage and grease leakage.

    Axle and suspension parts
    Inspection Check front and rear axle and suspension parts for excessive play, cracks, wear or other damage. • Shake each wheel to check for excessive play. • Check wheel bearings for smoo ...

    Locks, hinges and hood latch
    Lubricating- Coupe  Lubricating - Sedan ...

    Other materials:

    B2556 push-button ignition switch
    Description The switch that changes the power supply position. BCM maintains the power supply position status. BCM changes the power supply position with the operation of the push-button ignition switch. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION ...

    Main line between dlc and abs circuit
    Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the following terminals and connectors for damage, bend and loose connection (connector side and harness side). - Harness co ...

    P0868 secondary pressure down
    Description The pressure control solenoid valve B (secondary pressure solenoid valve) regulates the secondary pressure to suit the driving condition in response to a signal sent from the TCM. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE CAUTION: Always drive vehicle at a safe ...