Nissan Altima 2007-2012 Service Manual: Ducts, nozzles and grilles

Components

1. Upper ventilator duct

2. Heater and cooling unit assembly

3. Connector duct (LH

4. Floor ventilator duct (LH)

5. Connector duct (center)

6. Rear floor duct (LH)

7. Rear ventilator duct (center)

8. Rear floor duct (RH)

9. Floor ventilator duct (RH)

10. Connector duct (RH)

11. Rear console duct

1. Front defroster grille (RH)

2. Front defroster grille (LH)

3. Side defroster grille (LH)

4. Side ventilator grille (LH)

5. Center ventilator grilles (part of cluster lid C)

6. Rear ventilator grille (part of rear console finisher)

7. Side ventilator grille (RH)

8. Side defroster grille (RH)

9. Instrument panel

    Center ventilator grilles
     Removal and Installation REMOVAL Remove the center ventilator grilles (1) from the instrument panel using a suitable tool. INSTALLATION Installation is in the reverse order of removal. ...

    Other materials:

    IPDM E/R (Intelligent power distribution module engine room)
    Reference Value VALUES ON THE DIAGNOSIS TOOL TERMINAL LAYOUT PHYSICAL VALUES Wiring Diagram — Sedan Fail Safe CAN COMMUNICATION CONTROL When CAN communication with ECM and BCM is impossible, IPDM E/R performs fail-safe control. After CAN communication recov ...

    P0116 ect sensor
    Description The engine coolant temperature sensor is used to detect the engine coolant temperature. The sensor modifies a voltage signal from the ECM. The modified signal returns to the ECM as the engine coolant temperature input. The sensor uses a thermistor which is sensitive to the change i ...

    B2110 PNP/Clutch interlock switch
    Description IPDM E/R confirms the shift position with the following signals. • Park/neutral position (PNP) switch • Shift position signal from BCM (CAN) DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B2110 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000 ...