Nissan Altima 2007-2012 Service Manual: Flasher

 CONSULT-III Function

Work support

* : Initial setting

Data monitor

Active test

    Headlamp
    CONSULT-III Function WORK SUPPORT 1 : Initial setting 2: With auto light system DATA MONITOR 1: With auto light system. 2: The item is indicated, not monitored. ACTIVE TEST ...

    Comb SW
     CONSULT-III Function DATA MONITOR *: With autolamp system ...

    Other materials:

    P0452 evap control system pressure sensor
    Description The EVAP control system pressure sensor detects pressure in the purge line. The sensor output voltage to the ECM increases as pressure increases. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously condu ...

    Power supply and ground circuit
    Diagnosis Procedure 1.INSPECTION START Start engine. Is engine running? YES >> GO TO 8. NO >> GO TO 2. 2.CHECK ECM POWER SUPPLY CIRCUIT-I 1. Turn ignition switch OFF and then ON. 2. Check the voltage between ECM harness connector and ground. Is the inspection result n ...

    P0133, P0153 A/F sensor 1
    Description The air fuel ratio (A/F) sensor 1 is a planar one-cell limit current sensor. The sensor element of the A/F sensor 1 is composed an electrode layer, which transports ions. It has a heater in the element. The sensor is capable of precise measurement = 1, but also in the lean and ...