Nissan Altima (L32) 2007-2012 Service Manual: Function diagnosis
Additional service when replacing
control unit
Description
Initial setting is necessary when replacing power window main switch.
CAUTION:
The following specified operations are not performed under the non-initialized
condition.
• Auto-up ...
Power window system
System Diagram
FRONT POWER WINDOW LH ANTI-PINCH SYSTEM
System Description
MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH
INPUT/OUTPUT SIGNAL CHART
POWER WINDOW OPERATION
• Power window sy ...
Other materials:
IPDM E/R (Intelligent power distribution
module engine room)
Diagnosis Procedure
1. CHECK FUSES AND FUSIBLE LINK
Check that the following IPDM E/R fuses or fusible link are not blown.
Is the fuse blown?
YES >> Replace the blown fuse or fusible link after repairing the affected
circuit.
NO >> GO TO 2
2. CHECK POWER SUPPLY CIRCUIT
1. Tu ...
P0300, P0301, P0302, P0303, P0304, P0305, P0306 Misfire
DTC Logic
DTC DETECTION LOGIC
When a misfire occurs, engine speed will fluctuate. If the engine speed
fluctuates enough to cause the crankshaft
position (CKP) sensor (POS) signal to vary, ECM can determine that a misfire is
occurring.
The misfire detection logic consists of the following t ...
Road test
Description
DESCRIPTION
• The purpose of the test is to determine overall performance of CVT
and analyze causes of problems.
• The road test consists of the following three parts:
1. “Check Before Engine Is Started”TM-425.
2. “Check at Idle”TM-426.
3. “Cruise Test”TM-427 ...
