Nissan Altima 2007-2012 Service Manual: Function diagnosis

CAN COMMUNICATION SYSTEM

CAN System Specification Chart

Determine CAN system type from the following specification chart.

NOTE: Refer to LAN-16, "Trouble Diagnosis Procedure" for how to use CAN system specification chart.

×: Applicable

VEHICLE EQUIPMENT IDENTIFICATION INFORMATION

NOTE: Check CAN system type from the vehicle shape and equipment.

CAN Communication Signal Chart

Refer to LAN-15, "How to Use CAN Communication Signal Chart" for how to use CAN communication signal chart.

NOTE: Refer to LAN-21, "Abbreviation List" for the abbreviations of the connecting units.

*1: Models with VDC

*2: QR25DE models

*3: Models with VDC/TCS

NOTE: CAN data of the air bag diagnosis sensor unit is not used by usual service work, thus it is omitted.

    Basic inspection
    DIAGNOSIS AND REPAIR WORKFLOW Interview Sheet ...

    Other materials:

    P2A00 A/F sensor 1
    Description The air fuel ratio (A/F) sensor 1 is a planar one-cell limit current sensor. The sensor element of the A/F sensor 1 is composed an electrode layer, which transports ions. It has a heater in the element. The sensor is capable of precise measurement = 1, but also in the lean and r ...

    P1553 Battery current sensor
    Description The power generation voltage variable control enables fuel consumption to be decreased by reducing the engine load which is caused by the power generation of the generator. The battery current sensor is installed to the battery cable at the negative terminal. The sensor measures t ...

    How to follow trouble diagnoses
    Description NOTICE: Trouble diagnoses indicate work procedures required to diagnose problems effectively. Observe the following instructions before diagnosing. • Before performing trouble diagnoses, read the “Work Flow” in each section. • After repairs, re-check that the problem ...