Nissan Altima 2007-2012 Service Manual: Function diagnosis

Basic inspection
DIAGNOSIS AND REPAIR WORKFLOW Work Flow OVERALL SEQUENCE DETAILED FLOW NOTE: To ensure a complete and thorough diagnosis, the battery, starter and generator test segments must be done as a ...

Charging system
System Diagram System Description The generator provides DC voltage to operate the vehicle's electrical system and to keep the battery charged. The voltage output is controlled by the IC re ...

Other materials:

CVT fluid
Inspection CHECKING CVT FLUID Fluid level should be checked with the fluid warmed up to 50° to 80°C (122° to 176°F). The fluid level check procedure is as follows: 1. Check for fluid leakage. 2. With the engine warmed up, drive the vehicle in an urban area. When ambient temperature ...

L Terminal circuit
Description The terminal “2” (L) circuit controls the charge warning lamp. The charge warning lamp illuminates when the ignition switch is set to ON or START. When the generator is providing sufficient voltage with the engine running, the charge warning lamp will go off. If the charge war ...

Evap leak check
Inspection CAUTION: • Never use compressed air or a high pressure pump. • Never exceed 4.12 kPa (0.042 kg/cm2, 0.6 psi) of pressure in EVAP system. NOTE: • Do not start engine. • Improper installation of EVAP service port adapter (commercial service tool) to the EVAP service po ...