Nissan Altima (L32) 2007-2012 Service Manual: Headlamp
CONSULT-III Function
WORK SUPPORT
1 : Initial setting
2: With auto light system
DATA MONITOR
1: With auto light system.
2: The item is indicated, not monitored.
ACTIVE TEST
*: The item is indicated, not monitored.
Multi remote ent
CONSULT-III Function (BCM - MULTIREMOTE ENT) DATA MONITOR ACTIVE TEST WORK SUPPORT ...Wiper
CONSULT - III Function WORK SUPPORT * : Factory setting DATA MONITOR ACTIVE TEST ...Other materials:
Electrical load signal
Description
The electrical load signal (Headlamp switch signal, rear window defogger
switch signal, etc.) is transferred
through the CAN communication line.
Component Function Check
1.CHECK REAR WINDOW DEFOGGER SWITCH FUNCTION
1. Turn ignition switch ON.
2. Connect CONSULT-III and select ...
P0340, P0345 CMP sensor (phase)
Description
The camshaft position sensor (PHASE) senses the protrusion of
camshaft (INT) to identify a particular cylinder. The camshaft position
sensor (PHASE) senses the piston position.
When the crankshaft position sensor (POS) system becomes inoperative,
the camshaft position sensor (PHAS ...
Idle speed
Description
This describes how to check the idle speed. For the actual procedure, follow
the instructions in “BASIC
INSPECTION”.
Special Repair Requirement
1.CHECK IDLE SPEED
Check idle speed in “DATA MONITOR” mode with CONSULT-III.
Check idle speed with Service $01 of GST.
> ...