Nissan Altima 2007-2012 Service Manual: On-vehicle repair

On-vehicle maintenance
ENGINE COOLANT System Inspection • Never remove the radiator cap when the engine is hot. Serious burns could occur from high pressure fluid escaping from the radiator. • Wrap a thick clot ...

Radiator
Removal and Installation 1. Radiator 2. CVT oil cooler hose (if equipped) 3. Radiator hose (upper) 4. Radiator hose (lower) 5. Cooling fan 6. Reservoir tank 7. Reservoir hose 8. Radiator fil ...

Other materials:

Can communication circuit
Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the IPDM E/R for damage, bend and loose connection (unit side and connector side). Is the in ...

Changing engine oil
QR25DE engine 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature, then turn it off. 3. Remove the oil filler cap A by turning it counterclockwise. 4. Place a large drain pan under the drain plug B . ...

Ignition signal
Description The ignition signal from the ECM is sent to and amplified by the power transistor. The power transistor turns ON and OFF the ignition coil primary circuit. This ON/OFF operation induces the proper high voltage in the coil secondary circuit. Component Function Check 1.INSPECTION ...