Nissan Altima 2007-2012 Service Manual: Preparation
Special Service Tool
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Commercial Service Tool
Precaution
Supplemental Restraint System (SRS) "AIR BAG"
and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used alo ...
On-vehicle repair
GENERATOR
Removal and Installation
QR25DE
1.-2. Tightening order
3. Generator
4. B terminal nut
5. Generator bracket bolts
6. Generator bracket
Removal
1. Disconnect the battery negative ...
Other materials:
IPDM E/R (Intelligent power distribution
module engine room)
Reference Value
VALUES ON THE DIAGNOSIS TOOL
TERMINAL LAYOUT
PHYSICAL VALUES
Wiring Diagram — Sedan
Fail Safe
CAN COMMUNICATION CONTROL
When CAN communication with ECM and BCM is impossible, IPDM E/R performs
fail-safe control. After CAN
communication recov ...
B2607 steering lock relay
Description
BCM requests to IPDM E/R to supply power to electronic steering column lock.
IPDM E/R sends status of
electronic steering column lock back to BCM.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B2607 is displayed with DTC U1000, first perform the trouble diagnosis
for DTC U100 ...
Changing engine oil filter
1. Park the vehicle on a level surface and apply
the parking brake.
2. Turn the engine off.
3. Place a large drain pan under the oil filter A .
4. Loosen the oil filter A with an oil filter
wrench by turning it counterclockwise. Then
remove the oil filter by turning it by hand.
VQ35DE
CA ...