Nissan Altima 2007-2012 Service Manual: Satellite radio antenna

Removal and Installation

REMOVAL

1. Lower the headliner at the rear. Refer to INT-20, "Removal and Installation" (coupe) and INT-42, "Removal and Installation" (sedan).

2. Remove the satellite radio antenna nut (A), then disconnect the satellite radio antenna connector (B) and remove the satellite radio antenna (1).

INSTALLATION

Installation is in the reverse order of removal.

    Satellite radio tuner
    Removal and Installation - Coupe REMOVAL 1. Disconnect the battery negative terminal. 2. Remove the trunk floor carpet and spare tire cover. Refer to INT-23, "Removal and Installation" ...

    Steering switch
    Removal and Installation REMOVAL 1. Remove the driver airbag module. Refer to SR-5, "Removal and Installation". 2. Remove the steering wheel switch assembly screws (A), then remove ...

    Other materials:

    Inspection and adjustment
    Description & Conditions DESCRIPTION The purpose of the operational check is to confirm that the system operates properly. CONDITIONS: • Engine running and at normal operation temperature. Operational Check STEP 1: Check Blower 1. Turn blower control dial clockwise, blower should oper ...

    Intelligent key system/engine start function
    System Diagram System Description INPUT/OUTPUT SIGNAL CHART SYSTEM DESCRIPTION • The engine start function of Intelligent Key system is a system that makes it possible to start and stop the engine without removing the key. It verifies the electronic ID using two-way communications w ...

    P1572 ASCD Brake switch
    Description When the brake pedal is depressed, ASCD brake switch is turned OFF and stop lamp switch is turned ON. ECM detects the state of the brake pedal by those two types of input (ON/OFF signal). Refer to EC-1090, "System Diagram" for the ASCD function. DTC Logic DTC DETEC ...