Nissan Altima 2007-2012 Service Manual: Service data and specifications (SDS)

STARTER MOTOR

Starter

    On-vehicle repair
    STARTER MOTOR Removal and Installation M/T Models REMOVAL 1. Disconnect the negative battery terminal. 2. Disconnect the starter motor harness connectors. 3. Remove the two starter motor b ...

    Other materials:

    None of the power windows can be operated using any switch
    Diagnosis Procedure 1. CHECK BCM POWER SUPPLY AND GROUND CIRCUIT Check BCM power supply and ground circuit. Refer to BCS-42, "Diagnosis Procedure". Is the inspection result normal? YES >> GO TO 2 NO >> Repair or replace the malfunctioning parts. 2. CHECK MAIN POWER W ...

    Exhaust manifold and three way catalyst
    Removal and Installation 1. Exhaust manifold heat shield (RH) 2. Air fuel ratio (A/F) sensor 1 (bank 1) 3. Exhaust manifold (RH) 4. Gaskets 5. Heated oxygen sensor 2 (bank 1) 6. Three way catalyst (manifold) (bank 1) 7. Three way catalyst (manifold) (bank 2) 8. Heated oxygen sensor 2 (ba ...

    P0453 evap control system pressure sensor
    Description The EVAP control system pressure sensor detects pressure in the purge line. The sensor output voltage to the ECM increases as pressure increases. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously con ...