Nissan Altima 2007-2012 Service Manual: Service data and specifications (SDS)
Accelerator Control
PEDAL TRAVEL
On-vehicle repair
ACCELERATOR CONTROL SYSTEM
Exploded View
1. Accelerator pedal and accelerator
position sensor assembly.
2. Locating pins
Removal and Installation
REMOVAL
1. Disconnect the battery negative ...
Other materials:
Noise
Component Function Check
SYMPTOM: Noise
INSPECTION FLOW
*1 HAC-102, "Operational Check"
*2 EM-16, "Checking Drive Belts"
(QR25DE) or EM-121, "Checking
Drive Belts" (VQ35DE)
*3 HAC-159, "Performance Chart"
*4 HA-45, "Removal and Installation for
...
Accelerator pedal released position
learning
Description
Accelerator Pedal Released Position Learning is a function of ECM to learn
the fully released position of the
accelerator pedal by monitoring the accelerator pedal position sensor output
signal. It must be performed each
time harness connector of accelerator pedal position sensor ...
Additional service when replacing
control unit
Description
When replacing ECM, the following procedure must be performed.
Special Repair Requirement
1.PERFORM INITIALIZATION OF NVIS (NATS) SYSTEM AND REGISTRATION OF ALL
NVIS (NATS) IGNITION
KEY IDS
Refer to SEC-15, "ECM RE-COMMUNICATING FUNCTION : Special Repair Requireme ...