Nissan Altima 2007-2012 Service Manual: Symptom diagnosis
- None of the power windows can be operated using any switch
- Driver side power window alone does not operate
- Front passenger side power window alone does not operate
- Rear lh side power window alone does not operate
- Rear rh side power window alone does not operate
- Anti-pinch system does not operate normally (driver side)
- Auto operation does not operate but manual operates normally (driver side)
- Power window retained power operation does not operate properly
- Power window lock switch does not function
Precaution
Precaution for Supplemental Restraint System
(SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER ...
None of the power windows can be
operated using any switch
Diagnosis Procedure
1. CHECK BCM POWER SUPPLY AND GROUND CIRCUIT
Check BCM power supply and ground circuit.
Refer to BCS-42, "Diagnosis Procedure".
Is the inspection result normal?
...
Other materials:
P0603 ECM Power supply
Description
Battery voltage is supplied to the ECM even when the ignition switch
is turned OFF for the ECM memory function of the DTC memory, the
air-fuel ratio feedback compensation value memory, the idle air volume
learning value memory, etc.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATI ...
B1017 – b1022 occupant classification
system
Description
DTC B1017 – B1022 OCCUPANT CLASSIFICATION SYSTEM (OCS)
The occupant classification system control unit is wired to the air bag
diagnosis sensor unit. The air bag diagnosis
sensor unit will monitor the occupant classification system for control unit and
sensor mat failures and
...
B210b starter control relay
Description
Starter control relay, integrated in IPDM E/R, permits the starter relay
operation when in N or P position and
the steering is locked or unlocked. It is installed in parallel with the starter
relay.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B210B is displayed with DTC U1 ...