Other materials:

STRG branch line circuit
Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the steering angle sensor for damage, bend and loose connection (unit side and connector side). ...

Insufficient heating
Component Function Check SYMPTOM: Insufficient heating INSPECTION FLOW SYMPTOM: Insufficient heating 1. CONFIRM SYMPTOM BY PERFORMING OPERATION CHECK - TEMPERATURE INCREASE 1. Press the AUTO switch. 2. Turn temperature control dial (LH) clockwise until 32°C (90°F) is displayed. 3. Check ...

On board diagnostic (OBD) System
Diagnosis Description DESCRIPTION The CVT system has two self-diagnostic systems. The first is the emission-related on board diagnostic system (OBD-II) performed by the TCM in combination with the ECM. The malfunction is indicated by the MIL (malfunction indicator lamp) and is stored as a ...