Nissan Altima 2007-2012 Service Manual: Comb SW

 CONSULT-III Function

DATA MONITOR

*: With autolamp system

    Intelligent key
     CONSULT-III Function (BCM - INTELLIGENT KEY) WORK SUPPORT SELF-DIAG RESULT Refer to BCS-91, "DTC Index". DATA MONITOR ACTIVE TEST ...

    BCM
    CONSULT-III Function (BCM - BCM) WORK SUPPORT ...

    Other materials:

    B210D starter relay
    Description Located in IPDM E/R, it runs the starter motor. The starter relay is turned ON by the BCM when the ignition switch is in START position. IPDM E/R transmits the starter relay ON signal to BCM via CAN communication. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B210D is displaye ...

    ASCD Indicator
    Description The ASCD operation status is indicated by two indicators, (CRUISE and SET on the information display) on the combination meter. CRUISE indicator is displayed to indicate that ASCD system is ready for operation when MAIN switch on ASCD steering switch is turned ON. SET indica ...

    Combination switch input circuit
    Diagnosis Procedure 1. CHECK INPUT 1 - 5 SYSTEM CIRCUIT FOR OPEN 1. Turn the ignition switch OFF. 2. Disconnect the BCM and combination switch. 3. Check continuity between BCM harness connector and combination switch harness connector. Does continuity exist? YES >> GO TO 2 NO ...