Nissan Altima 2007-2012 Service Manual: Intelligent key

 CONSULT-III Function (BCM - INTELLIGENT KEY)

WORK SUPPORT

SELF-DIAG RESULT

Refer to BCS-91, "DTC Index".

DATA MONITOR

ACTIVE TEST

    Flasher
     CONSULT-III Function Work support * : Initial setting Data monitor Active test ...

    Comb SW
     CONSULT-III Function DATA MONITOR *: With autolamp system ...

    Other materials:

    CD changer
    Diagnosis Procedure 1.CHECK FUSE Check that the following fuses of the CD changer are not blown. Are the fuses OK? YES >> GO TO 2 NO >> Be sure to eliminate cause of malfunction before installing new fuse. 2.CHECK POWER SUPPLY CIRCUIT Check voltage between CD changer harness con ...

    B2604 PNP switch
    Description BCM confirms the shift position with the following 4 signals. • CVT selector lever • P/N position switch • P position signal from IPDM E/R (CAN) • P position signal from TCM (CAN) DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B2604 is displayed with DTC U1000, first ...

    M&A branch line circuit
    Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the combination meter for damage, bend and loose connection (unit side and connector side). ...