Nissan Altima Owners Manual: Control panel buttons color screen with Navigation System (if so equipped)

1. PWR button/VOL (volume) control knob

1. PWR button/VOL (volume) control knob 2. Display screen
3. ENTER / AUDIO button / TUNE / SCROLL knob
4. 5. MAP button* BACK button
5. MAP button*
6. NAV button*
7. 8.  (brightness control) button button
8. 9.  button** (brightness control) button
9. 10. CAMERA button button**
10. CAMERA button

* For information regarding the Navigation system control buttons, refer to the separate Navigation System Owners Manual.

** For information regarding the Bluetooth Hands-Free Phone System control button, see Bluetooth Hands-Free Phone System with Navigation System (if so equipped) in this section.

When you use this system, make sure the engine is running.

If you use the system with the engine not running (ignition ON or ACC) for a long time, it will discharge the battery, and the engine will not start.

Reference symbols:

Example Words marked in quotes refer to a key shown only on the display. These keys can be selected by touching the screen.

Monitor, climate, audio, phone and voice recognition systems
WARNING ● Positioning of the heating or air conditioning controls and display controls should not be done while driving in order that full attention may be given to the driving operation. ...

How to use the touch screen
CAUTION ● The glass display screen may break if it is hit with a hard or sharp object. If the glass screen breaks, do not touch it. Doing so could result in an injury. ● To clean th ...

Other materials:

Lan system circuit
Description SYMPTOM: Mode door motor, intake door motor and/or air mix door motor does not operate normally. Diagnosis Procedure DIAGNOSIS PROCEDURE FOR LAN CIRCUIT 1.CHECK POWER SUPPLY FOR DOOR MOTORS 1. Press ignition switch ON. 2. Check voltage between front air control connector M37 ...

Magnet clutch
Component Function Check INSPECTION FLOW 1. CONFIRM SYMPTOM BY PERFORMING OPERATION CHECK - MAGNET CLUTCH 1. Press ignition switch ON. 2. Press vent switch ( ). 3. Press A/C switch. 4. Confirm that the compressor clutch engages (sound or visual inspection). (Discharge air and blower ...

Description Horn (high/low) is located inside of front bumper and operates when theft warning system is in alarm phase. Component Function Check 1.CHECK FUNCTION 1. Select HORN in “ACTIVE TEST” mode with CONSULT-III. 2. Check the horn (high/low) operation. Is the operation normal? ...