Nissan Altima 2007-2012 Service Manual: Encoder

Passenger side
 Description Door glass moves UP/DOWN by receiving the signal from main power window and door lock/unlock switch or power window and door lock/unlock switch RH. Component Function Check 1. ...

Driver side
 Description Detects condition of the power window motor LH operation and transmits to main power window and door lock/unlock switch as pulse signal. Component Function Check 1. CHECK ENCO ...

Other materials:

P0127 IAT sensor
Description The intake air temperature sensor is built-into the mass air flow sensor (1). The sensor detects intake air temperature and transmits a signal to the ECM. The temperature sensing unit uses a thermistor which is sensitive to the change in temperature. Electrical resistance of the ...

P0725 engine speed signal
Description The engine speed signal is transmitted from ECM to TCM by CAN communication line. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE CAUTION: Always drive vehicle at a safe speed. NOTE: If “DTC CONFIRMATION PROCEDURE” has been previously performed, always turn ig ...

Front timing chain case
Removal and Installation 1. Gasket 2. IVT control valve cover RH 3. IVT valve RH 4. IVT valve LH 5. Water pump cover 6. IVT control valve cover LH 7. Crankshaft pulley 8. Front oil seal 9. Front timing chain case A. Follow installation procedure NOTE: • This section describes procedu ...