Nissan Altima Owners Manual: F.M.V.S.S./C.M.V.S.S. certification label

The Federal/Canadian Motor Vehicle Safety Standard (F.M.V.S.S./C.M.V.S.S.) certification label is affixed as shown. This label contains valuable vehicle information, such as: Gross Vehicle Weight Ratings (GVWR), Gross Axle Weight Rating (GAWR), month and year of manufacture, Vehicle Identification Number (VIN), etc. Review it carefully.

    Engine serial number
    The number is stamped on the engine as shown. ...

    Emission control information label
    The emission control information label is attached to the underside of the hood as shown. ...

    Other materials:

    P0335 CKP sensor (POS)
    Description The crankshaft position sensor (POS) is located on the oil pan facing the gear teeth (cogs) of the signal plate. It detects the fluctuation of the engine revolution. The sensor consists of a permanent magnet and Hall IC. When the engine is running, the high and low parts of the ...

    Headlamp
    Aiming Adjustment PREPARATION BEFORE ADJUSTING NOTE: • For details, refer to the regulations in your area. • Perform aiming adjustment if the vehicle front body has been repaired and/or the front combination lamp assembly has been replaced. Before performing aiming adjustment, c ...

    IPDM-E branch line circuit
    Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the IPDM E/R for damage, bend and loose connection (unit side and connector side). Is the in ...