Nissan Altima 2007-2012 Service Manual: Flasher

 CONSULT-III Function

Work support

* : Initial setting

Data monitor

Active test

    Wiper
    CONSULT - III Function WORK SUPPORT * : Factory setting DATA MONITOR ACTIVE TEST ...

    Intelligent key
     CONSULT-III Function (BCM - INTELLIGENT KEY) WORK SUPPORT SELF-DIAG RESULT Refer to BCS-91, "DTC Index". DATA MONITOR ACTIVE TEST ...

    Other materials:

    IPDM-E branch line circuit
    Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the IPDM E/R for damage, bend and loose connection (unit side and connector side). Is the in ...

    Rear view monitor system (coupe)
    System Diagram System Description When the selector is in the R position, the display shows a view to the rear of the vehicle. Lines which indicate the vehicle clearance and distances are also displayed. AV COMMUNICATION LINE The rear view camera control unit is connected to the AV control ...

    P0500 VSS
    Description The vehicle speed signal is sent to the combination meter from the “ABS actuator and electric unit (control unit)” by CAN communication line. The combination meter then sends a signal to the ECM by CAN communication line. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC P0 ...