Nissan Altima 2007-2012 Service Manual: Function diagnosis

Basic inspection
DIAGNOSIS AND REPAIR WORKFLOW Work Flow DETAILED FLOW 1.CONFIRM SYMPTOM Confirm symptom or customer complaint. >> GO TO 2 2.CHECK SELF-DIAGNOSIS OPERATION OF COMBINATION METER Perform ...

Meter system
System Diagram System Description COMBINATION METER • Speedometer, odo/trip meter, tachometer, fuel gauge, engine coolant temperature gauge and information display are controlled by the unif ...

Other materials:

Warning lamps/indicator lamps
System Diagram System Description OIL PRESSURE WARNING LAMP The oil pressure warning lamp is controlled by the IPDM E/R (intelligent power distribution module engine room). Low oil pressure causes the oil pressure switch to provide a ground signal to the IPDM E/R. The IPDM E/R then sig ...

P0182, P0183 FTT sensor
Description The fuel tank temperature sensor is used to detect the fuel temperature inside the fuel tank. The sensor modifies a voltage signal from the ECM. The modified signal returns to the ECM as the fuel temperature input. The sensor uses a thermistor which is sensitive to the change in te ...

B210c starter control relay
Description Starter control relay, integrated in IPDM E/R, permits the starter relay operation when in N or P position and the steering is locked or unlocked. It is installed in parallel with the starter relay. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B210C is displayed with DTC U100 ...