Nissan Altima 2007-2012 Service Manual: IMMU

 CONSULT-III Function (BCM - IMMU)

DATA MONITOR

ACTIVE TEST

    BCM
    CONSULT-III Function (BCM - BCM) WORK SUPPORT ...

    Battery saver
    CONSULT-III Function WORK SUPPORT * : Initial setting DATA MONITOR ACTIVE TEST * : Each lamp switch is in ON position. ...

    Other materials:

    P0300, P0301, P0302, P0303, P0304 misfire
    DTC Logic DTC DETECTION LOGIC When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the crankshaft position (CKP) sensor (POS) signal to vary, ECM can determine that a misfire is occurring. The misfire detection logic consists of the following ...

    AV Branch line circuit
    Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the AV control unit for damage, bend and loose connection (unit side and connector side). I ...

    None of the power windows can be operated using any switch
    Diagnosis Procedure 1. CHECK BCM POWER SUPPLY AND GROUND CIRCUIT Check BCM power supply and ground circuit. Refer to BCS-42, "Diagnosis Procedure". Is the inspection result normal? YES >> GO TO 2 NO >> Repair or replace the malfunctioning parts. 2. CHECK MAIN POWER W ...