Nissan Altima 2007-2012 Service Manual: Battery saver

CONSULT-III Function

WORK SUPPORT

* : Initial setting

DATA MONITOR

ACTIVE TEST

* : Each lamp switch is in ON position.

    IMMU
     CONSULT-III Function (BCM - IMMU) DATA MONITOR ACTIVE TEST ...

    Trunk
    CONSULT-III Function (BCM - TRUNK) DATA MONITOR ACTIVE TEST ...

    Other materials:

    P0181 FTT Sensor
    Description The fuel tank temperature sensor is used to detect the fuel temperature inside the fuel tank. The sensor modifies a voltage signal from the ECM. The modified signal returns to the ECM as the fuel temperature input. The sensor uses a thermistor which is sensitive to the change in te ...

    Key slot illumination
    Description Blinks when Intelligent Key insertion is required. Component Function Check 1.CHECK FUNCTION Check key slot illumination (“KEY SLOT ILLUMI”) Active Test mode. Is the inspection result normal? YES >> Key slot function is OK. NO >> Refer to SEC-313, "Diagn ...

    Body sealing
    Description The following figure shows the areas which are sealed at the factory. Sealant which has been applied to these areas should be smooth and free from cuts or gaps. Care should be taken not to apply an excess amount of sealant and not to allow other unaffected parts to come into conta ...