Nissan Altima Owners Manual: Lights

Battery replacement
CAUTION Be careful not to allow children to swallow the battery or removed parts. NISSAN INTELLIGENT KEY® Replace the battery in the Intelligent Key as follows: 1. Remove the mechanical key from ...

Headlights
Replacing the xenon headlight bulb (if so equipped) WARNING HIGH VOLTAGE When xenon headlights are on, they produce a high voltage. To prevent an electric shock, never attempt to modify or disas ...

Other materials:

Power supply and ground circuit
Description • EPS system functions by ignition power supply. Diagnosis Procedure 1.CHECK POWER SUPPLY 1. Turn the ignition switch OFF. 2. Disconnect power steering control unit harness connector. 3. Check voltage between power steering control unit harness connector M59 terminal 3 and ...

P2100, P2103 Throttle control motor relay
Description Power supply for the throttle control motor is provided to the ECM via the throttle control motor relay. The throttle control motor relay is controlled ON/OFF by the ECM. When the ignition switch is turned ON, the ECM sends an ON signal to throttle control motor relay and battery ...

Checking bulbs
With all doors closed, apply the parking brake and place the ignition switch to the ON position without starting the engine. The following lights will come on: The following lights (if equipped) come on briefly and then go off: If any light fails to come on, it may indicate a burned-out b ...