Nissan Altima Owners Manual: Sun visors

1 To block glare from the front, swing down the


1 To block glare from the front, swing down the main sun visor.

2 To block glare from the side, remove the main sun visor from the center mount and swing the visor to the side.

3 To extend (if so equipped) the sun visor, slide in or out as needed.

CAUTION

● Do not store the sun visor before returning the extension to its original position.

● Do not pull the extension sun visor forcedly downward.

VANITY MIRRORS


VANITY MIRRORS

To access the vanity mirror, pull the sun visor down and flip open the mirror cover. Some vanity mirrors are illuminated and turn on when the mirror cover is open.

    Telescopic operation
    Pull the lock lever down 1 and adjust the steering wheel forward or backward 3 to the desired position. Push the lock lever up 1 firmly to lock the steering wheel in place. WARNING Do not adju ...

    Mirrors
    ...

    Other materials:

    B2604 PNP switch
    Description BCM confirms the shift position with the following 4 signals. • CVT selector lever • P/N position switch • P position signal from IPDM E/R (CAN) • P position signal from TCM (CAN) DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B2604 is displayed with DTC U1000, first ...

    P0116 ect sensor
    Description The engine coolant temperature sensor is used to detect the engine coolant temperature. The sensor modifies a voltage signal from the ECM. The modified signal returns to the ECM as the engine coolant temperature input. The sensor uses a thermistor which is sensitive to the change i ...

    P2423 HC adsorption catalyst function
    DTC Logic DTC DETECTION LOGIC The ECM monitors the phase gap between heated oxygen sensor 2 signal and heated oxygen sensor 3 signal. The phase gap between heated oxygen sensor 2 signal and heated oxygen sensor 3 signal becomes small as the HC adsorption catalyst (under floor) is deteriorate ...