Nissan Altima 2007-2012 Service Manual: Trunk

CONSULT-III Function (BCM - TRUNK)

DATA MONITOR

ACTIVE TEST

    Battery saver
    CONSULT-III Function WORK SUPPORT * : Initial setting DATA MONITOR ACTIVE TEST * : Each lamp switch is in ON position. ...

    Theft ALM
     CONSULT-III Function (BCM - THEFT ALM) WORK SUPPORT DATA MONITOR ACTIVE TEST ...

    Other materials:

    Rear RH
     Description Door glass moves UP/DOWN by receiving the signal from main power window and door lock/unlock switch or rear power window switch RH. Component Function Check 1. CHECK POWER WINDOW MOTOR CIRCUIT Does rear power window motor RH operate with operating power window main switch ...

    P0442 Evap control system
    DTC Logic DTC DETECTION LOGIC This diagnosis detects leakage in the EVAP purge line using engine intake manifold vacuum. If pressure does not increase, the ECM will check for leakage in the line between the fuel tank and EVAP canister purge volume control solenoid valve, under the followin ...

    Throttle valve closed position learning
     Description Throttle Valve Closed Position Learning is a function of ECM to learn the fully closed position of the throttle valve by monitoring the throttle position sensor output signal. It must be performed each time the harness connector of electric throttle control actuator or ECM ...