Nissan Altima Owners Manual: How to adjust the screen (if so equipped)

settings, press the SETTING button while the RearView Monitor screen is displayed. Each time the SETTING button is pressed, the next setting item is selected. Turn the TUNESCROLL/TUNEFOLDER control knob to adjust each item.

Available setting items:

● Brightness
● Contrast
● Tint
● Color
● Black Level

The setting items will disappear and the display will return to the original screen if SETTING button is pressed when the last setting item is selected or if the screen is left without operation for some time.

    Difference between predicted and actual distances
    The distance guide line and the vehicle width guide line should be used as a reference only when the vehicle is on a level, paved surface. The distance viewed on the monitor is for reference only ...

    Operating tips
    CAUTION ● Do not use alcohol, benzine or thinner to clean the camera. This will cause discoloration. To clean the camera, wipe with a cloth dampened with a diluted mild cleaning agent and t ...

    Other materials:

    Telescopic operation
    Pull the lock lever down 1 and adjust the steering wheel forward or backward 3 to the desired position. Push the lock lever up 1 firmly to lock the steering wheel in place. WARNING Do not adjust the steering wheel any closer to you than is necessary for proper steering operation and comfor ...

    Trouble diagnosis - specification value
    Description The specification (SP) value indicates the tolerance of the value that is displayed in “SPEC” of “DATA MONITOR” mode of CONSULT-III during normal operation of the Engine Control System. When the value in “SPEC” of “DATA MONITOR” mode is within the SP value, the En ...

    Auto operation does not operate but manual operates normally (driver side)
    Diagnosis Procedure 1. PERFORM INITIALIZATION PROCEDURE Perform initialization procedure. Refer to PWC-190, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement". Is the inspection result normal? YES >> GO TO 2 NO >> Repair or replace the ma ...