Nissan Altima Owners Manual: Vents
Side
Adjust air flow direction by moving the vent slides.
Open or close the vents by using the dial. Move
the dial toward the 
to open the
vents or
toward the 
to close them.
Center
Rear
Moving Object Detection (MOD) (if so equipped)
The Moving Object Detection (MOD) system can
inform the driver of moving objects behind the
vehicle when backing out of garages, maneuvering
in parking lots and in other such instances.
The MOD ...
Heater and Air Conditioner (manual) (if so equipped)
1. Fan speed control / system OFF dial /
air conditioning (A/C) button
2. Air flow control buttons
3. Temperature control dial / MAX A/C
button
4. Air recirculation button
5. Rear window defro ...
Other materials:
B2108 steering lock relay
Description
The steering lock relay ON signal is transmitted to IPDM E/R by BCM via CAN
communication.
IPDM E/R turns the steering lock relay ON and transmits the release of the
steering to BCM.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B2108 is displayed with DTC U1000, first perf ...
Floor trim
Exploded View
1. Spacer (LH)
2. Floor carpet
3. Spacer (RH)
4. Floor mat hook
Removal and Installation
REMOVAL
1. Remove the diagnosis sensor unit. Refer to SR-17, "Removal and
Installation".
2. Remove front seat (RH/LH) and rear seat cushion. Refer to SE-23, "Removal ...
Anti-pinch system does not operate normally (driver side)
Diagnosis Procedure
1. PERFORM INITIALIZATION PROCEDURE
Perform initialization procedure.
Refer to PWC-295, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special
Repair Requirement".
Is the inspection result normal?
YES >> GO TO 2
NO >> Repair or replace the mal ...