Nissan Altima 2007-2012 Service Manual: On-vehicle repair

Preparatio
Special Service Tools The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here. Commercial Service Tools ...

Door finisher
Exploded View 1. Mirror cover 2. Front door finisher 3. Step lamp lens 4. Rear door finisher 5. Step lamp/reflector lens (if equipped) 6. Arm rest finisher 7. Rear door power window switch f ...

Other materials:

Both side headlamps do not switch to high beam
Description The headlamps (both sides) do not switch to high beam when the lighting switch is in the HI or PASS setting. Diagnosis Procedure 1.COMBINATION SWITCH INSPECTION Check the combination switch. Refer to BCS-10, "System Description". Is the combination switch normal? YE ...

B210F PNP/Clutch interlock switch
Description IPDM E/R confirms the shift position with the following signals. • Park/neutral position (PNP) switch • Shift position signal from BCM (CAN) DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B210F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000 ...

Clearing the programmed information
The following procedure clears the programmed information from both buttons. Individual buttons cannot be cleared. However, individual buttons can be reprogrammed. See “Reprogramming a single HomeLink® button” in this section. To clear all programming: 1. Press and hold the two outer Ho ...