Nissan Altima Owners Manual: Instruments and controls
- Instrument panel
- Meters and gauges
- Compass display (if so equipped)
- Warning/indicator lights and audible reminders
- Vehicle Information Display
- How to use the vehicle information display
- Startup display
- Settings
- Vehicle information display warnings and indicators
- Security systems
- Windshield wiper and washer switch
- Rear window and outside mirror (if so equipped) defroster switch
- Headlight and turn signal switch
- Xenon headlights (if so equipped)
- Headlight control switch
- Daytime running light system (Canada only)
- Instrument brightness control
- Turn signal switch
- Fog light switch (if so equipped)
- Horn
- Heated seats (if so equipped)
- Heated steering wheel (if so equipped)
- Warning systems switch (if so equipped)
- Vehicle Dynamic Control (VDC) off switch
- Power outlet
- Storage
- Map pockets
- Seatback pockets (if so equipped)
- Sunglasses holder
- Cup holders
- Glove box
- Console box
- Grocery hooks
- Windows
- Moonroof (if so equipped)
- Interior light
- Personal Lights
- Map lights
- Trunk light
- HomeLink® universal transceiver (if so equipped)
Supplemental air bag warning light
The supplemental air bag warning light,
displaying in the instrument panel,
monitors
the circuits for the air bag systems, pretensioners
and all related wiring.
When the ignition is placed ...
Instrument panel
1. Instrument brightness control/Trip computer
reset switch
2. Vents
3. Headlight/fog light (if so equipped)/turn
signal switch
4. Driver supplemental air bag/horn
5. Meters and gauges
6. P ...
Other materials:
U1210 DVD-ROM seek
Description
Refer to AV-240, "System Description".
DTC Logic
DTC DETECTION LOGIC
Diagnosis Procedure
1.CHECK DVD-ROM
Check DVD-ROM for dirt, scratches and warpage.
Is the DVD-ROM clean and undamaged?
YES >> Replace AV control unit. Refer to AV-437, "Removal and I ...
P1553 battery current sensor
Description
The power generation voltage variable control enables fuel consumption to be
decreased by reducing the
engine load which is caused by the power generation of the generator. The
battery current sensor is installed
to the battery cable at the negative terminal. The sensor measures ...
P0137 HO2S2
Description
The heated oxygen sensor 2, after three way catalyst (manifold),
monitors the oxygen level in the exhaust gas on each bank.
Even if switching characteristics of the air fuel ratio (A/F) sensor 1
are shifted, the air-fuel ratio is controlled to stoichiometric, by the signal
from t ...