Nissan Altima Owners Manual: Safety—Seats, seat belts and supplemental restraint system
- Seats
- Front manual seat adjustment (if so equipped
- Front power seat adjustment (if so equipped for driver’s seat)
- Folding rear seat
- Front seat head restraints/headrests
- Rear seat head restraints/headrests
- Seat belts
- Precautions on seat belt usage
- Pregnant women
- Injured persons
- Three-point type seat belt with retractor
- Seat belt extenders
- Seat belt maintenance
- Child safety
- Child restraints
- Precautions on child restraints
- LATCH (Lower Anchors and Tethers for CHildren) System
- Rear-facing child restraint installation using LATCH
- Rear-facing child restraint installation using the seat belts
- Forward-facing child restraint installation using LATCH
- Forward-facing child restraint installation using the seat belts
- Installing top tether strap
- Booster seats
- Supplemental restraint system
Seats
WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into i ...Other materials:
Refrigeration system
Component
1. Heater and cooling unit assembly
2. High-pressure pipe
3. High-pressure A/C service valve
4. Junction pipe
5. High-pressure flexible hose
6. Condenser and liquid tank
7. Air deflector RH (QR25DE shown,
VQ35DE similar)
8. Air deflector LH (QR25DE shown,
VQ35DE similar)
9. R ...
LATCH (Lower Anchors and Tethers for CHildren) System
LATCH system anchor locat
Your vehicle is equipped with special anchor
points that are used with LATCH (Lower Anchors
and Tethers for CHildren) system compatible
child restraints. This system may also be referred
to as the ISOFIX or ISOFIX compatible system.
With this system, you do not ha ...
Trouble diagnosis - specification
value
Description
The specification (SP) value indicates the tolerance of the value that is
displayed in “SPEC” of “DATA MONITOR”
mode of CONSULT-III during normal operation of the Engine Control System. When
the value in “SPEC”
of “DATA MONITOR” mode is within the SP value, the En ...